PSP3000 5.03 GEN-A Custom Firmware (support the ISO/CSO)
We are finally arrived at our first launch of the Custom Firmware 5.03GEN for HEN-A and we are pleased that you are as likely to want to test it.
Features: 
- PSP-3000 and PSP-2000 v3 Support
- PSOne Game Support
- ISO/UMD Backup Support
- GEN VSH MENU
- Recovery in VSH available (some bugs remain – see the README)
- Access to PSN
Install Note: ~~~~~~~~~~ NOTES: - When you installed the custom firmware in your flash you can remove the "files" folder in the MS ROOT. - If you shutdown the machine or the psp crash, you will need use again ChickHEN R2 to load the main app and press O BUGS: - In recovery mode after the option "Configuration" the option selected is the next option. For example, Advanced is REMEMBER! THIS APP DONT TOUCH ANY FILE FROM THE ORIGINAL FIRMWARE! IS YOUR FAULT IF YOU LATER CONNECT TO THE FLASH0 AND TOUCH SOME OFFICIAL FILE AND YOU HAVE A BRICK! DONT TOUCH THEM AND NOT FLASH ANY CUSTOM THEME! Download this file for free @ UseNeXT Team Typhoon and group lead Davee have made good on their promise to deliver a properly working version of the universal homebrew enabler known as ChickHEN, initially released yesterday. For those in need of a refresher, this enables homebrew support on firmware 5.03 for all PSP revisions, including the PSP-3000 and TA-088 v3 equipped 2000 units. Despite being hampered by bugs the first time around, R2 turns the tables with proper, fully-functional homebrew support. Users are advised to stick to using 3.X kernel based applications, as older legacy software based on the 1.5 kernel will have issues with running from within the HEN environment. Download this file for free @ UseNeXT
[ChickHEN Revision 2] – Team Typhoon [Changelog] [What it does?] [What it does not do?] [How do I use it?] [Can it break my PSP?] As stated, HEN comes with no warrenty, and this software should not be used in conjunction with homebrew which can countervent any copyright laws.
For your own safety, is better that you rename or erase the prx called "flasher.prx" in the MAIN APP folder to
avoid wrong flash times.
to reboot in the custom firmware, but if you dont shutdown the machine you are in the custom firmware forever.
CPU Speed, etc. This is a problem with the original recovery, because I dont have the code is very difficult find the problem.DOWNLOAD: Custom Firmware 5.03HEN for HEN-A
DOWNLOAD: ChickHEN R2 (Homebrew Enabler)
- Now supports homebrew
- Homebrew Support enhanced
- Tiff image blocking in HEN (displays unsupported)
ChickHEN works as a homebrew enabler for all PSP models (1000, 2000 and 3000) and allows execution of homebrew games and apps on 5.03 Official firmware. It can allow you to play games such as Bugz!, Jellycar or run apps such as pspfiler and PSPTube. Homebrew enhances the experience of a normal PSP without any faulty side-effects.
- Run ISO, CSO or any other form of UMD backup.
- Run PSX Games
- Touch The Flash of your beloved PSP
- Magically allow the use of Custom Firmware (on TA-088v3 or PSP 3000)
- Load plugins
Depending on your PSP Model, you’re going to need a specific tiff image. If you have a Phat (1000) PSP, use the tiff image supplied in the "PHAT" folder and copy it to ms0:/PSP/PHOTO. Else copy the tiff image in the "SLIM" folder to ms0:/PSP/PHOTO. After you’ve copied the image to your PSP, you can copy the h.bin supplied to the root of the memorystick (ms0:/). This should be sufficient for PSP to reboot into ChickHEN.
ChickHEN works differently to all previous HEN’s. Instead of flashing to flash0, it resides entirely in RAM to prevent any damage to the system. Sure enough, you can run applications in HEN to flash stuff but I strongly recommend against it. ChickHEN comes with no warrenty, no guanantee and you run this software under your own responsibility. Flashing onto your PSP WILL BRICK IT!!
.png)
 DVD Rip.png)
No comments yet.
Be first to leave your comment!